Oxytocin COA and Testing Explained
Both Oxytocin vial sizes have public COAs. The latest 10MG lot (OXYT10-062026-1) showed 99.41% HPLC purity and the 2MG lot (OXY02-042026-1) 99.65%, by Freedom Diagnostics Testing.
For laboratory research use only. Not for human or animal use. This page describes the material and its paperwork. It gives no use, preparation or administration instructions.
Latest lots for Oxytocin
| Strength | Latest lot | HPLC purity | Report date | COA number |
|---|---|---|---|---|
| 10MG | OXYT10-062026-1 | 99.41% | Jun 3, 2026 | 2606010639 |
| 2MG | OXY02-042026-1 | 99.65% | Apr 23, 2026 | 2604210049 |
Lab: Freedom Diagnostics Testing (Franklin, TN), an independent laboratory that Simple Peptide does not own. Figures are copied from our purity data page; the COA PDF is the record that counts.
What each line on the COA means
- Lot number. The lot printed on the vial label must match the lot on the report. If it does not match, the report is not for your vial.
- HPLC-UV purity. This is the share of the main peak in the chromatogram. It shows how clean the sample is. It does not say what the molecule is.
- LC-MS identity. This checks the measured mass against the expected mass. For reference, the expected average molecular weight is Oxytocin 1007.2 g/mol.
- Dates. “Received” is when the lab got the sample. “Reported” is when the result was issued.
- COA Search Code. Current reports carry a code that starts with “Simp”. Enter it on the lab’s public lookup to compare the lab’s copy with ours.
What to look for on this COA
- Expected average mass is 1,007.2 g/mol for the ring-closed (disulfide) form. The open form would be about 2 g/mol heavier.
- Disulfide-linked dimers would show near twice the mass and count against purity.
- 2MG and 10MG are separate lots with separate reports.
Four checks before you order
- Find the lot in the COA lookup or the COA archive. No account is needed to read COAs.
- Match the strength on the report to the vial size you plan to buy.
- Read purity and identity together. A high purity figure with a failed or missing identity result is not a pass.
- Check the report on the lab’s own lookup. A COA that cannot be found at the lab should not be trusted.
What the COA does not tell you
A COA is a record for one tested lot. It is not a statement about any use of the material, and it does not cover lots made later. When a lot sells out, the next lot gets its own report. If a strength shows “COA pending”, the new lot has been sent for testing and the report is not posted yet.
For a longer walk-through of the report layout, see how to read a peptide COA.
Molecular data: Oxytocin
What it is: A cyclic nonapeptide of the neurohypophysial hormone family.
| Property | Value |
|---|---|
| Molecular formula | C43H66N12O12S2 |
| Average molecular weight | 1007.2 g/mol |
| Monoisotopic mass | 1006.4365 Da |
| CAS number | 50-56-6 |
| PubChem CID | 439302 |
| Other names (PubChem synonyms) | Ocytocin, alpha-Hypophamine |
| Modifications | Disulfide bridge between Cys1 and Cys6 (six-residue ring). C-terminal glycinamide. |
| Residue makeup | 9 residues: cysteine 2, glycine 1, isoleucine 1, leucine 1, asparagine 1, proline 1, glutamine 1, tyrosine 1. Basic (K, R, H): 0. Acidic (D, E): 0. |
| Net charge at pH 7.0 (computed) | +1.0 |
| Isoelectric point (computed) | 9.3 |
| One-letter sequence | CYIQNCPLG-NH2 (Cys1-Cys6 disulfide) |
| Three-letter sequence | H-Cys(1)-Tyr-Ile-Gln-Asn-Cys(1)-Pro-Leu-Gly-NH2 |
| InChIKey | XNOPRXBHLZRZKH-DSZYJQQASA-N |
| SMILES | CC[C@H](C)[C@H]1C(=O)N[C@H](C(=O)N[C@H](C(=O)N[C@@H](CSSC[C@@H](C(=O)N[C@H](C(=O)N1)CC2=CC=C(C=C2)O)N)C(=O)N3CCC[C@H]3C(=O)N[C@@H](CC(C)C)C(=O)NCC(=O)N)CC(=O)N)CCC(=O)N |
| IUPAC name | (2S)-1-[(4R,7S,10S,13S,16S,19R)-19-amino-7-(2-amino-2-oxoethyl)-10-(3-amino-3-oxopropyl)-13-[(2S)-butan-2-yl]-16-[(4-hydroxyphenyl)methyl]-6,9,12,15,18-pentaoxo-1,2-dithia-5,8,11,14,17-pentazacycloicosane-4-carbonyl]-N-[(2S)-1-[(2-amino-2-oxoethyl)amino]-4-methyl-1-oxopentan-2-yl]pyrrolidine-2-carboxamide |
Formula, weights, InChIKey, SMILES and IUPAC name are from the linked PubChem record. Net charge and isoelectric point are computed from the sequence (EMBOSS pKa values, free ends as listed) and are estimates. Salt forms (for example acetate or TFA) and water content change the weight of a real sample.
Product
Oxytocin: 2MG and 10MG vials. Lot COAs are public for every listed lot.
Research use only. Not for human or animal use. Orders require a verified research account (21+). Ships to U.S. addresses only.
FAQ
Who tests Oxytocin lots?
Freedom Diagnostics Testing in Franklin, TN, an independent lab that Simple Peptide does not own. Current reports carry a Search Code you can check on the lab’s own site.
What purity did the latest Oxytocin lot show?
Lot OXYT10-062026-1 (10MG) showed 99.41% HPLC-UV purity, reported Jun 3, 2026 (COA 2606010639). Check the purity data page for newer lots.
Is HPLC purity the same as identity?
No. HPLC purity shows how clean the sample is. LC-MS identity checks that the mass matches the expected molecule. A lot needs both.
Where do I find the COA for my vial?
Search the lot number on the label in the Simple Peptide COA lookup or COA archive, then compare it with the lab’s copy using the Search Code.
Is Oxytocin for human use?
No. It is sold for laboratory research use only. It is not for human or animal use.